* Change bugtracker address.
	  

	- Change bugtracker address.
	  

* Don't bail out if mailq or mailstats fails.
	  

	- Catch fatal errors from the Net::ACME2 module.
	- Improve pound configuration parser.
	- New options to the pound source: "--comment". "--type",
	and "--listener".  The "--comment" option instructs the
	program to issue certificates for hostnames marked by
	a specific pragmatic comment.  The "--type" option
	instructs it to process hostnames defined within listeners
	of a particular type ("http" or "https").  Finally,
	"--listener" selects listener by its tag.
	  

** Fix compilation with GDBM 1.18.1

** Support for Guile version 2.2.0 and later

Support for prior versions has been withdrawn.

** anubisusr requires GnuTLS

** New configuration statement: use-pam

Used in CONTROL section, this boolean statement enables or disables
the use of the Pluggable Authentication Module interface for
accounting and session management.

** New configuration statement: identd-keyfile

Sets the name of the file with shared keys used for decryting replies
from the auth service.  It is used in traditional mode if anubis
receives an encrypted response from the client's identd server
(e.g. if they are running pidentd with encryption).

** Bugfixes
	  

* Fix threshold calculation in the cleaner module.
* Refuse to start if another copy is already running.
	  

Initial release.
	  

* New command line option --done (-d)

This option is a counterpart of --init and supplies a cleanup
expression, i.e. an expression that will be evaluated when the
main loop has iterated over all nodes in the tree.

* New parser: DHCPD

A parser for dhcpd.conf file.

* Drop support for Guile versions prior to 2.2.0
	  

* Fix operation of --no-absolute-filenames --make-directories
* Restore access and modification times of symlinks in copy-in
  and copy-pass modes.
	  

* Bugfixes in the gcide module

* Fix searches in the gcider utility

* Support for Python 2 has been withdrawn
	  

* Simultaneous execution limits

It is possible to limit number of command instances that are allowed
to run simultaneosly for a particular watcher.  This is done using
the 'max-instances' statement in 'watcher' section.

* Restore the nowait default

Unless given the 'nowait' option explicitly, watchers waited for the
handler to terminate.  It is now fixed and 'nowait' is the default, as
described in the documentation.

* Fix bug in generic to system event translation

* Fix sentinel code

In some cases setting the sentinel effectively removed the original
watcher.  That happened if the full file name of the original watcher
and its directory part produced the same hash.
	  

* Fix compilation with gcc 12.2.0
	  

* Fix EOF check with flex >= 2.6.1

* Fix multiple definitions of mimetypes_error_format

* Avoid runtime errors with recent versions of libmicrohttpd
	  

* New command verb: wait

Instructs genrc to wait for the program to finish.  This implies that
the program is terminated by some third-party means.  The command
exits with code 0 if the program has finished and with code 1 if stop
timeout has been reached.
	  

* Use explicit DESTROY with AUTOLOADs
	  

Initial release.
	  

Fix deadlock.
	  

* ftp

An old inability to allow other names than the canonical name has
been corrected.  This means that a machine entry in the .netrc file
will now be used as expected.  Previously any alias name was replaced
by the corresponding canonical name, before reading the .netrc file.

The internal command `hash' accepts a suffixed letter to the size
argument, like `12k', instead of 12288.  Made a minor change to the
syntax of the command itself, allowing size changes independently
of activation of hash markings.  After a transfer the summary gives
the speed as `Mbytes/s', `kbytes/s', or `bytes/s'.

The .netrc file can be overridden by the environment variable NETRC.
Of even higher precedence is the new option `-N/--netrc'.  The access
to the resulting file, whatever method, is now denied unless it is a
regular file.

* ifconfig

Better command line parsing on BSD and Solaris systems.  Touch only
changeable flags on all systems.

* logger

The ability to use numerical facilities is restored to full range.

* ping, ping6

The ability to specify a pattern as payload is corrected.

* syslogd

A new switch `-T/--local-time' makes the service ignore a time
stamp passed on by the remote host, recording instead the local
time at the moment the message was received.  As a short form of
`--pidfile', the switch `-P' is new.

In common with other syslogd implementations, rsyslogd and sysklogd,
there has for a long time existed an attack vector based on large
facility numbers, made public in CVE-2014-3684.  This is now mended
in our code base.

* telnetd

The ability to autologin a client, without using authentication,
is now functional in the expected manner, i.e., the prompt for a
user name is suppressed in favour of an immediate password prompt.

In a setting where the client is using a UTF-8 encoding, it was
common to observe strange characters in most responses.  This was
caused by the server daemon, due to incomplete purging of internal
protocol data.  The issue should now be resolved.

* whois

Improved cooperation with servers like `whois.arin.net', `whois.eu',
and `whois.ripe.net'.
	  

* Implement heartbeat event

* Add auxiliary program: ifactive

* Fix file descriptor leak
	  

* The program is installed in /usr/bin

Prior versions went to /usr/sbin, you will need to remove them
manually.

* Print /etc/issue before the prompt
* Sleep after incorrect password is input
* New options: -i (--issue), -s (--sleep), -c (--clear)
* Add a manpage
* Improve error checking and reporting
	  

* Compatibility .mf suffix not supported any more

* Begin and end handlers must be defined using prog keyword

* Module and include search paths

Since version 8.15, if a module was not found in module search path,
the search was retried using include search path.  This is no longer
the case: the two paths serve different purposes and don't interact
in any way.  MFL modules are searched in module search path only.

* Use of Sendmail macros in run mode

Sendmail macros can be defined in run mode by placing assignments
macro=value before the script file name, e.g.:

  mailfromd --run i=123 client_addr=::1 test.mfl foo bar baz

This example defines Sendmail macro "i" to "123" and "client_addr" to
"::1".  The words "foo", "bar", and "baz" will be passed to the
main function as positional parameters.

* Full IPv6 support

This causes changes in the following MFL functions (see also "New functions",
below):

** dns_query

 number dns_query (number TYPE, string DOMAIN; number SORT, number RESOLVE)

The semantics and possible values of the RESOLVE argument have
changed.  It used to be a boolean value.  Now its allowed values (as
defined in status.mfl module) are:

     'RESOLVE_NONE'
          Don't resolve hostnames to IP addresses.  This is the default.

     'RESOLVE_DFL'
          Resolve hostnames to IP addresses according to the address
          family of the SMTP session.  That is, use 'A' records if the
          client connected using the INET family (i.e.  connected to the
          IPv4 address), and use 'AAAA' records if the client connected
          to the IPv6 address.

     'RESOLVE_IP4'
          Resolve hostnames to IPv4 addresses ('A' records).

     'RESOLVE_IP6'
          Resolve hostnames to IPv6 addresses ('AAAA' records).

Values of these constants has been selected so that any existing
code using 0/1 as the value of this argument will work without
changes.

** primitive_resolve and resolve functions

 string primitive_resolve (string HOST; string DOMAIN, number FAMILY)
 string resolve (string HOST; string DOMAIN, number FAMILY)

The use of DOMAIN argument is deprecated.

By default the function selects the type of RR set to search for
using the address family of the SMTP connection: A is used for INET
(IPv4 addresses) and AAAA is used for INET6 (IPv6 addresses).

New argument FAMILY can be used to request particular RR type.  Its
possible values are:

     'RESOLVE_DFL'
          Look for 'A' or 'AAAA', depending on the connection type.
          This is the default.

     'RESOLVE_IP4'
          Resolve to IPv4 addresses ('A' records).

     'RESOLVE_IP6'
          Resolve to IPv6 addresses ('AAAA' records).

* New functions

** string is_ipstr(string S)

Returns 1 if S is a string representation of an IP address (IPv4 or
IPv6).

** string is_ip4str(string S)

Returns 1 if S is a string representation of an IPv4 address.

** string is_ip6str(string S)

Returns 1 if S is a string representation of an IPv6 address.

** string reverse_ipstr(string IP)

Returns a reversed representation of the IP address, suitable for
use in DNS labels.

** string tr(string SUBJ, string SET1, string SET2)

Transliterates characters in SUBJ by replacing all occurrences of the
characters found in SET1 with the positionally corresponding characters
in SET2.  Character ranges ('a-z') are allowed in both sets.  A character
range in SET1 translates to a corresponding character from the range in
SET2, e.g. tr(x, 'a-z', 'A-Z') translates string x to uppercase.

Character classes ([a-z], [[:alpha:]], etc) are allowed in SET1 and
translate to the corresponding single character from SET2, e.g.
tr(x, '[[:digit:]]', '_') replaces all decimal digits in string x with
underscores.

** string dc(string SUBJ, string SET)

Deletes from SUBJ characters that appear in SET.  The syntax of SET is as
described for SET1 above.

** string sq(string SUBJ, string SET)

"Squeeze repeats".  Replaces each sequence of a repeated character
that is listed in SET, with a single occurrence of that character.

* Changes in match_cidr function.

The match_cidr function is re-implemented as a built-in.

The module match_cidr.mfl is deprecated.

* Deprecated MFL modules

The following MFL modules are deprecated.  They are retained for
backward compatibility.  Existing code using any of these will compile
and work as in previous releases, except that a warning will be
printed to draw your attention to the fact.  You are advised to remove
any uses of these modules, as they will be removed in future versions:

** match_cidr.mfl

This module is not needed any more.

** is_ip.mfl

This module defines function is_ip() which is superseded by is_ipstr()
built-in (see above).

** revip.mfl

This module defines function revip() which is superseded by
reverse_ipstr() built-in.
	  

* Use of TLS in pop3d and imap4d

If not explicitly specified, the TLS mode to use (ondemand, connect,
etc.) is derived from the configured port.  E.g., for imap4d, port 143
implies ondemand mode, and port 993 implies connection mode.

The global tls-mode setting is used only when the mode cannot be
detemined otherwise, i.e. neither per-server tls-mode is given nor
the port gives any clues as to the TLS mode to use.

* Bugfixes

** movemail: fix handling of -P option.
** pop3d, imap4d: fix global timeout and transcript configuration statements
** pop3d, imap4d: global tls-mode is used only when the mode to use cannot
   be determined otherwise.
** pop3d, imap4d: if not set explicitly, derive tls mode from the port used.
** Improve file safety checking routine.
** Fix compilation with new gcc versions.
	  

* Micron is a part of GNU project

* Take into account DST changes when computing job startup time

* Minor fix in crontab parser
	  

* Minor fixes in mysqlstat-setup
* Provide default values for NULL columns
	  

First actual release.
	  

* pam_fshadow: skip-password option

Based on the proposal of Mirsad Goran Todorovac, the new option
skip-password instructs pam_fshadow to check whether the user
being authenticated is present in the passwd and/or shadow files,
without verifying his password.  This way pam_fshadow can be used as
an auxiliary module in the stack, actual authentication being
performed by one of the modules before it.
	  

* New configuration keywords

** sigterm SIG

Available for use in "component" sections.  This statement defines
signal which pies should send to the running component instance in
order to terminate it.  Defaults to SIGTERM.

* Fix the component shutdown sequence

The shutdown sequence is determined taking into account dependencies
between components, so that all dependent components are stopped
before their prerequisite components.

* Fallback log file

Fallback log file is a place where pies writes out of band log messages,
i.e. messages about not being able to open syslog socket or send logs
to it.  Regular log messages are diverted to this file if syslog was
requested, but cannot be used because of a permanent error.

* Bugfixes

** Fix piesctl config reload

** Fix configuration preprocessing.

** Varios fixes in REST API server.
	  

* Fix handing of the Connection: HTTP handler (both server and client)
	  

* New configuration statement: IgnoreSRVWeight

Instructs pound to ignore weight value of an SRV record when
generating new backend from it.  Priority of the generated backend is
copied from its matrix backend.

* New configuration statement: OverrideTTL

When used with dynamic backends, instructs pound to use the supplied
value as TTL, instead of the one returned in DNS response.

* Load balancing code revisited

Removed arbitrary limit on backend priority value.  The allowed range
is now 1..65535.

Remove priority mapping for SRV-generated backends.  SRV weights are
assigned to backend priorities verbatim.

* Fix access to freed memory in session handling code.

* Improve testsuite

Check for missing perl modules and skip tests if needed.

DNS-based tests are disabled by default, due to their experimental
nature.  Use --enable-dns-tests to enable them.

The poundharness.pl script runs a self-test when invoked with the
--fakedns option, to avoid spurious test failures.
	  

Initial version.
	  

* Configuration file raddb/config

The syslog statement takes an optional 4th argument specifying syslog
tag to use, e.g.:

    channel default {
	    syslog local1.info radiusd;
    };

* New attributes

** GNU-Server-Address

Holds IP address of the RADIUS server that recieved the
request. Notice, that the value of this attribute is "0.0.0.0" if
there are no `listen' statement in your `raddb/config'.

** GNU-Server-Port

Holds UDP port number of the RADIUS server that recieved the request.

* Automake function AM_GNU_RADIUS is provided, for checking if
GNU Radius is installed from configure.ac scripts.

* Guile support requires Gule version 1.8 or later.

* Bugfixes
** Pass NAS-IP-Address to mlc_stop_query
	  

* Hostgroup stack

Rex now maintains a stack of hostgroups.  Once you push a hostgroup
name on stack, that hostgroup will be used by any subsequent rex
command, unless it is given the -g option.  The new command "group"
(see below) provides ways to pop items off the stack, swap arbitrary
element with the top of stack, select new hostgroups on the fly, etc.

* New command: rex group

The "rex group" command has the following forms:

  rex group push GROUP
    Push GROUP on stack.

  rex group pop
    Pop the topmost group off the stack.

  rex group swap N
    Exchange top of the stack with the Nth element (0-based).

  rex group drop N
    Remove Nth element from the stack.

  rex group select COMMAND ARGS...
    Create on top of the stack a temporary group that contains
    those hosts from the current hostgroup where the supplied
    shell command returns success, i.e. exits with code 0.

  rex group show
    List the contents of the hostgroup stack.

* Add configuration function for overriding PTR records from rc files
	  

* Syslog support

New option '-S FACILITY' switches diagnostic output to the given
syslog facility.
	  

* Use getgrouplist call, if available

* Fix in rush-po script

* Bugfixes
	  

* Support for Slackware 15.0
	  

* Support SNMPv3
* Default SNMP version is 2c
* Use newer Grecs
* Drop unneeded dependencies
* Variable assignments in expressions
* Detection of SNMP counter overflows
* Comma operator
* Support for indexed MIBs

This feature allows you to use symbolic names instead of the fixed MIBs
for MIBs that are part of SNMP subtrees.  For example, to get number of
packets sent over eth0 into variable "out", you would do the following:

    table iftable IF-MIB::ifDescr;
    variable out "IF-MIB::ifOutUcastPkts.$iftable[eth1]";

The first statement converts the subtree into a "table" named "iftable".
The second statement references an entry in this table that has
the value "eth1".  For example, if the SNMP tree has the following MIB

    IF-MIB::ifDescr.10: eth0

then the expression "$iftable[eth]" yields "10"

* Assertion syntax changed.

The assertion statement takes a single argument, which must be a
string consisting of the following three parts:

   <oid: string> [!]<opcode>[/i] <value: string>

The <opcode> part can be either an arithmetical operator (=, <, <=, >,
>=), or any of the following string operators:

    eq          string equality
    ne          string inequality
    prefix      oid value must begin with <value>
    suffix      oid value must end with <value>
    glob        <value> is a glob(7) pattern that oid value must match

Each of these can be suffixed with "/i" to request case-insensitive comparison.

A "!" in front of opcode reverts its meaning.

The <value> part must not include the type prefix.
	  

* Support for Guile 2.2

* Bugfixes

* Improved testsuite
	  

Initial release.
	  

* Fix check for hostname presence in the message
	  

* Identify service instances by container ID

* Fix regexp for hostproc docker exclusion group
	  

* Fail when building GNU tar, if the platform supports 64-bit time_t
  but the build uses only 32-bit time_t.

* Leave the devmajor and devminor fields empty (rather than zero) for
  non-special files, as this is more compatible with traditional tar.

* Bug fixes

** Fix interaction of --update with --wildcards.

** When extracting archives into an empty directory, do not create
   hard links to files outside that directory.

** Handle partial reads from regular files.

** Warn "file changed as we read it" less often.
   Formerly, tar warned if the file's size or ctime changed.
   However, this generated a false positive if tar read a file
   while another process hard-linked to it, changing its ctime.
   Now, tar warns if the file's size, mtime, user ID, group ID,
   or mode changes.  Although neither heuristic is perfect,
   the new one should work better in practice.

** Fix --ignore-failed-read to ignore file-changed read errors
   as far as exit status is concerned.  You can now suppress file-changed
   issues entirely with --ignore-failed-read --warning=no-file-changed.

** Fix --remove-files to not remove a file that changed while we read it.

** Fix --atime-preserve=replace to not fail if there was no need to replace,
   either because we did not read the file, or the atime did not change.

** Fix race when creating a parent directory while another process is
   also doing so.

** Fix handling of prefix keywords not followed by "." in pax headers.

** Fix handling of out-of-range sparse entries in pax headers.

** Fix handling of --transform='s/s/@/2'.

** Fix treatment of options ending in / in files-from list.

** Fix crash on 'tar --checkpoint-action exec=\"'.

** Fix low-memory crash when reading incremental dumps.

** Fix --exclude-vcs-ignores memory allocation misuse.
	  

Rewrite as a stand-alone snmpd agent.
	  

* New configuration statement: sentinel

The "sentinel" statement declares the name of a file which, when
present in the destination directory, informs vcsync that this
directory is exempt from the normal synchronization process.  The
presense of the sentinel file is an indication that the destination
directory is updated by other means.

* Full documentation added
	  

* Support for Varnish 7.1
	  

* Support for Varnish 7.1
	  

* Support for Varnish 7.1
	  

* Support for Varnish 7.1
	  

* Support for Varnish 7.1
* Drop support for Varnish versions prior to 6.0.0.
	  

* Support for Varnish 7.1
	  

* Support for Varnish 7.1
	  

Fix handling of archivation requests.
	  

* Fix parsing of po header fields

* Use the Language header instead of Language-Team.

Support for Language-Team and language tables is retained for
backward compatibility.

* Organizational change: repository moved to git

The repository along with links for cloning can be viewed online at
http://git.gnu.org.ua/cgit/wyslij-po.git.

See https://puszcza.gnu.org.ua/git/?group=wyslij-po for instructions.
	  

* Diagnostic directives: $$warning and $$error

The $$warning directive emits warning message.  It does not alter exit
status in any way.

The $$error directive reports a fatal error and sets exit status to
65 (or any other, if supplied as argument).

After both directives, processing is resumed at the next line.

* $$exit

New directive $$exit causes immediate termination of the program.
Decimal exit code may be supplied as argument.

* New directive: $$eval

The text between $$eval and $$end is expanded and the resulting
expansion is scanned again, producing the actual output.  This makes
it possible to create variable names on the fly and obtain their values.
Useful in loops, e.g.:

  $$loop I 0 1 2 3 4 5 6 7
  $$  eval
  \$\$ ifset VAR_$I
  Expand \$VAR_$I;
  \$\$ endif
  $$ end
  $$end

* Bugfixes

** Fix closing the $$range loop.